Print This Page

NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500

::::: NEW LISTING ::::::

27ft. SALCOMBE TRADER GAFF CUTTER, hull designed by Barry Pritchard & built by Buccaneer Boats, Cornwall & fit out by Jonathan March, launched in 2010

NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500
NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500 NEW LISTING - 27ft SALCOMBE TRADER GAFF CUTTER built in 2010 - Lying: Cornwall - £68,500

Overall Length: 27ft :: Waterline: 25ft 9ins :: Beam: 9ft 6ins :: Draught: 5ft :: Displacement: 7 Tons

Engine: 28hp Beta Diesel Engine :: Designer: Barry Pritchard :: Builder: Buccaneer Boats / Jonathan March :: Location: Cornwall

Sail: Gaff Cutter Rig :: Berths: Five Berths :: Year: 2010 :: Price: £68,500

Broker's Details:

HISTORY & DESCRIPTION:

The owner of this fine example of the Salcombe Trader purchased the GRP hull, moulded by Buccaneer Boats, then designed and fitted out the coach roof, deck and interior to a very high, no expense spared, specification. As a cabinet maker the project was completed alongside his regular work in a lean to adjacent to his workshop in Cornwall and launched in 2010.

The 27 foot Salcombe Trader hull was chosen after much research and reading the excellent reviews in the Classic Boat, Yachting Monthly and Boatman magazines (reprints available)

The fit out is to a very high standard using the best materials and components available at the time.

Beam 9ft 6 inches, Draught 5ft, Displacement fully loaded 7 tons, internal epoxy encapsulated lead ballast 3 tons.

Timbers are as follows: Teak for sampson posts, cockpit seats, rubbing strake and galley work-top. Iroko for a brightwork, bulwarks, coachroof and cockpit camings, boom crutch, interior doors, framing etc.. Spars are resorcinol glued spruce made by Collars Ltd.

Marine ply decks, epoxy sheathed finished with 2 pack polyurethane non slip paint. Bronze portlights and winches. Transom hung rudder with lifting tiller and Raymarine pilot. Numerous custom made stainless steel fittings.

28hp Beta Marine engine. Two batteries with shore hook up for charging. Comprehensive installation of instruments.

GAFF CUTTER RIG sets 630 sq. ft (58.5 sq. m) total sail area with furling jibs (1&2), furling staysail, bronze roller reefing main sail and including top sail. All sails by SKB.

Hollow, deck stepped Collars Ltd spruce mast with gaff, boom and lifting bowsprit. Stainless steel standing rigging set up with bottle screws, also whisker shrouds running backstays, stanchions and guard rails.

ACCOMMODATION for five - in two cabins. Double fore cabin, two single saloon berths convert to double and quarter berth. Force 10 LPG cabin heater. Iroko table that folds out to double width but also folds up against main bulkhead to allow converting side berths to a double with roll out slats. Solid bi-fold doors to fore cabin and heads compartment.

HEADS: with Lavac Marine WC, and fold down wash basin.

GALLEY: with Nelson Spinflow 1500 two burner LPG hob, oven and grill, gimballed. Teak work-top with under mounted stainless steel sink, waste bin and 12 volt Isotherm coolbox. Hot, cold and filtered water taps. Haztec LPG sensor and control for alarm and remote solenoid switching at bottle.

INVENTORY & SPECIFICATION:

ENGINE

Beta Marine BD1005 3 cylinder 28 HP with 1174 hours on clock. 100 amp alternator with smart controller, PRM gearbox, Aquadrive coupling, rope cutter and Axiom 3 bladed bronze prop. Installation with good accessibility and sound proofed removable panels.

Dolphin All in One 15amp battery charger and mains circuit breaker linked to shore mains socket.

PUMPS

One Henderson manual pump for heads/anchor locker/holding tank with 2 way valves.

One Henderson manual pump for galley sink and bilges with 2 way valve.

One whale automatic bilge pump.

AT CHART TABLE

One 180Ahr and one 80Ahr 12 volt battery fully switchable, with alternator and shore hook up. Both batteries monitored by BEP D600-DCM2 meter.

Garmin GPS 152 (position at chart table or cockpit)

Instruments linked via USB to laptop running various software packages including chart plotter (included in sale).

Raymarine ST60 wind depth speed instruments and GP tiller pilot

Navtex Furuno NX-300

VHF Standard Horizon GX 3000E

Sony VHF stereo radio/CD player

Circuit breaker switchboard and switch panel for LED navigation lights and bilge blower.

Fuel, water and holding tank gauges.

Chart table with under mounted Yeoman paper chart plotter with West Country UKHO folios included.

12 volt bilge pump control

Exhaust temperature alarm

Plastimo bulkhead compass

BELOW CABIN SOLE

96 ltr diesel tank

30 ltr hot water calorifier heated by both engine and mains immersion heater on hook up, 94 ltr cold water tank, also 290 ltr flexible tank under fore peak berth (414 ltrs total)

45 ltr holding tank

Chain locker for 60m 10mm chain fed by hawsepipe from Quick Electic/manual windlass with remote control and chain counter.

Brass ships clock barometer and tide clock.

3 brass oil lamps

ON DECK

Delta 20kg main anchor

Plough anchor stored in wet locker

60m chain

Custom bow fitting with twin rollers and opening gate for lifting bowsprit

Four Antal bronze sheet winches

All blocks main sheet traveller etc by Harken

Boom Cover

Boom and cockpit mooring cover

Iroko fore hatch and main hatch. Vetus saloon hatch and 12 volt extractor vents over galley and in heads.

Cockpit gas locker for 2 bottles and large locker for fenders warps boarding ladder etc.

WINTER STORAGE

As well as the boom cockpit cover a steel trolley/cradle is included for safe secure layup.

BROKERS NOTE:

A top quality traditional cruising yacht of immense character and a capable passage maker. Having the benefit of a 'classic' look with the advantage of an easily maintained moulded hull.

Offered at a competitive price for a relatively new yacht which compares favourably with the Cornish Crabber 30.

Contact us for more information or to arrange to view

GUIDE: £68,500

LYING: West Country

Viewing: Through the brokers - CLASSIC YACHT BROKERAGE - info@classicyachtbrokerage.co.uk 01905-356482 / 07949-095075